Guide for US companies
Paying foreign contractors from the US: forms, withholding and payment rails
To pay a foreign contractor from the US, you usually ask for Form W-8BEN (an individual) or W-8BEN-E (a company) instead of a W-9, keep it on file rather than sending it to the IRS, and pay a USD invoice by wire or through a platform such as Stripe. For services performed entirely outside the US, there is generally no US withholding and no Form 1099. Confirm with your accountant.
- Form to collect
- W-8BEN or W-8BEN-E
- Sent to the IRS?
- No, you keep it on file
- Key test
- Where the work is performed
- Final word
- Your accountant
Updated · By the Codebrix team
Start with where the work is performed
Almost every US tax question about a foreign contractor turns on one fact: where the services are physically performed. The IRS states that the place where personal services are performed generally determines the source of the income, regardless of where the contract was made, where payment is made or where the payer lives.
So a developer in Noida writing code for a company in Texas earns foreign-source income from the US point of view, even though the client and the money are American. If the same contractor flies to the US and works on-site for two weeks, the IRS says pay for services performed partly inside and partly outside the US is generally allocated on a time basis, so part of the fee becomes US-source.
Record it. The contract or statement of work should say where the work will be performed, and if anyone on the vendor team will travel to the US to work, tell your accountant before the trip, not after.
Forms W-8BEN and W-8BEN-E: what to collect
For a US contractor you would collect Form W-9. For a foreign one, the equivalent is a Form W-8. The IRS describes Form W-8BEN as the form a foreign individual gives to the withholding agent or payer, and Form W-8BEN-E as the form foreign entities use to document their status. The IRS's FAQ for withholding agents puts it plainly: the foreign vendor uses Form W-8BEN or W-8BEN-E to certify that it has non-US status.
| Your contractor is | Form to request | Notes |
|---|---|---|
| A foreign individual (freelancer) working outside the US | Form W-8BEN | Signed by the individual |
| A foreign company or other foreign entity | Form W-8BEN-E | Signed by a person authorised to sign for the entity |
| A US citizen or US resident living abroad | Form W-9 | US persons do not use W-8 forms; US reporting rules apply |
| A US company whose team works overseas | Form W-9 | You are paying a US entity |
Practical rules from the IRS instructions
- Do not send the form to the IRS. The instructions tell the payee to give it to the person requesting it, generally the payer.
- Get it before you pay. The instructions ask the payee to provide it before the payment is made or credited.
- Diary the expiry. A W-8BEN generally remains in effect until the last day of the third calendar year after the year it was signed, unless a change in circumstances makes it incorrect, so a form signed in 2026 generally runs to 31 December 2029.
- Ask for a new form if circumstances change, for example if the contractor moves to the US or becomes a US person.
- Store it with the vendor's contract, so it is easy to find if anyone asks why no 1099 was issued.
Withholding: when the 30% rule applies and when it does not
IRS Publication 515, written for withholding agents, explains that most types of US-source income received by a foreign person are subject to US tax of 30%, generally collected by withholding, with a lower rate or an exemption possible under a tax treaty. The words that matter are US source. The IRS's withholding-agent FAQ states that for income paid to a foreign person to be subject to this reporting and withholding, the payment must be US sourced.
Put that together with the sourcing rule. A fee for development work performed entirely in India is not US-source income, so this withholding generally does not reach it. That is the usual reason a US company paying an overseas agency for remote work withholds nothing. It is also why the W-8 matters: it documents that the payee is foreign, so you are not left treating the payment as if it were made to a US person.
Situations where the answer changes
- Part of the work is performed in the US, such as an on-site workshop or launch week. The US-source share may be subject to withholding.
- The payment is not for services, for example a licence fee or royalty for software the vendor owns and licenses to you. Different rules apply to that income.
- The payee is a US person, even one living abroad. Use Form W-9 and the US reporting rules.
- You cannot reliably link the payment to a valid W-8. Publication 515 says you must then apply presumption rules, which in some cases mean treating the payment as made to a US person.
Form 1099 and Form 1042-S
Form 1099-NEC is how US businesses report payments to US contractors. Publication 515 states that foreign persons who provide a valid Form W-8 are exempt from backup withholding and Form 1099 reporting. Form 1042-S is used to report payments that are subject to the withholding rules for foreign persons. So payments for services performed entirely outside the US, made to a foreign contractor with a valid W-8 on file, generally need neither a 1099 nor a 1042-S.
Two avoidable mistakes: issuing a 1099 to a foreign agency because the accounting software defaulted to it, and paying a US citizen freelancer abroad without a W-9 because they live overseas. Both are prevented by collecting the right form at onboarding and recording the vendor's tax status in your accounts payable system.
Payment rails: wire transfer and Stripe
International wire
A wire from your US bank to the vendor's bank account abroad is the traditional route. You need the beneficiary's legal name and address, account number, bank name and address, and the bank's SWIFT code. Fees can be charged by your bank, by intermediary banks and by the receiving bank, so agree in the contract who bears them; otherwise invoices will not reconcile.
Fake 'updated bank details' emails are a risk with any supplier. Confirm bank details on a call with someone you know at the vendor before the first payment and whenever they change, and never act on a bank-change request that arrives only by email.
Stripe
If the vendor invoices through Stripe, you receive an invoice you can pay online. Per Stripe's documentation, customers can pay with any of the payment methods the issuer has enabled, and each method has its own limits by currency and the issuer's business location; cards are supported in most currencies and locations. Ask the vendor which methods its invoices accept before the first milestone falls due.
Invoices in USD: what to ask for
Ask foreign vendors to invoice in USD. You pay a fixed dollar amount, the vendor carries the exchange-rate risk, and your books need no conversion. A clean invoice from an overseas contractor shows:
- The vendor's full legal name and registered address, matching the W-8.
- A unique invoice number and the invoice date.
- Your company's legal name and address.
- The milestone or SOW the invoice relates to, and the amount in USD.
- A statement that the services were performed outside the United States, where that is the case.
- Payment instructions, with bank details that match the ones you confirmed by phone.
- Payment terms, such as the number of days allowed for payment.
Tie each invoice to an accepted milestone. When every invoice traces back to a signed SOW, an acceptance email and a W-8 on file, year-end close and any audit question become straightforward. Our software development contract checklist covers how milestones and acceptance should be written.
Onboarding checklist, and how we invoice
- Signed MSA and SOW, stating where the work is performed.
- Correct W-8 form (or W-9 for a US person) received before the first payment.
- W-8 expiry date entered in your calendar.
- Bank details confirmed by phone with a known contact.
- Responsibility for wire fees agreed in writing.
- Invoice currency agreed: USD.
- Each invoice matched to an accepted milestone before payment.
- Your accountant has reviewed the set-up once, especially if anyone will work on-site in the US or the payment includes licence fees.
We invoice US clients in USD, per milestone, once each milestone is delivered and approved, and take payment by Stripe or bank transfer. We never ask for the whole fee upfront. For how the rest of an engagement works, see our US location page; if you are still budgeting, the in-house vs outsourcing cost guide sets out the numbers. And as with everything above, confirm with your accountant.
Frequently asked questions
Do I need to issue a 1099 to a foreign contractor?
Generally not, for a foreign contractor who performs the work entirely outside the US and gives you a valid Form W-8BEN or W-8BEN-E. IRS Publication 515 states that foreign persons who provide a valid Form W-8 are exempt from backup withholding and Form 1099 reporting. A US citizen living abroad is different: collect a W-9. Confirm with your accountant.
Do I send Form W-8BEN to the IRS?
No. The IRS instructions tell the foreign payee to give the form to the person requesting it, generally the payer, and not to send it to the IRS. Keep it with the vendor's contract and payment records, note when it expires, and ask for a new one if the contractor's circumstances change. Confirm your record-keeping with your accountant.
Do I have to withhold 30% from payments to an overseas developer?
The 30% withholding in IRS Publication 515 applies to US-source income paid to foreign persons. The IRS says personal service income is sourced where the services are performed, so fees for work done entirely outside the US are generally not US-source and not subject to that withholding. On-site work in the US, licence fees and royalties can change the answer.
What is the difference between W-8BEN and W-8BEN-E?
Form W-8BEN is for foreign individuals; Form W-8BEN-E is for foreign entities such as companies. Ask an individual freelancer for a W-8BEN and an overseas agency or company for a W-8BEN-E. Both certify that the payee is not a US person, and you keep the form on file rather than filing it with the IRS.
What is the simplest way to pay a contractor in India from the US?
The two common routes are an international wire from your US bank and, if the vendor invoices through it, a payment platform such as Stripe. Agree the invoice currency, ideally USD, and who pays wire fees. Confirm bank details by phone before the first payment and whenever they change, and keep every invoice tied to an accepted milestone.
How long is a Form W-8BEN valid?
According to the IRS instructions, a Form W-8BEN generally remains in effect from the date it is signed until the last day of the third succeeding calendar year, unless a change in circumstances makes information on it incorrect. A form signed in 2026 therefore generally stays valid until 31 December 2029. Set a reminder to request a fresh one.
Sources
- IRS: About Form W-8BEN
- IRS: About Form W-8BEN-E
- IRS: Instructions for Form W-8BEN (10/2021)
- IRS: Instructions for Form W-8BEN-E
- IRS Publication 515 (2026): Withholding of Tax on Nonresident Aliens and Foreign Entities
- IRS: Source of income, personal service income
- IRS: U.S. withholding agent frequently asked questions
- Stripe Docs: Invoicing payment methods
Related
United States
An offshore web development company in India for US businesses
Offshore web development company in India for US businesses: USD pricing, Stripe or wire payment, IP assigned to you, and a planned ET and PT overlap.
Read moreGuide for US companies
A software development contract checklist for US companies hiring an outside team
A software development contract checklist for US companies: IP assignment, escrow, acceptance, warranty, liability, disputes, data terms and handover.
Read moreGuide for US companies
The cost of hiring a software developer in the US vs outsourcing the build
Cost of hiring a software developer in the US vs outsourcing: BLS wage and benefit data, fully loaded cost, hidden hiring costs and a worked comparison.
Read moreOutsourcing guide
Outsourcing software development to India: a practical playbook for buyers
Outsourcing software development to India from the US, UK, EU or Australia: engagement models, IP, payments, time zones, red flags and a 30-day plan.
Read moreGuide for US companies
Nearshore or offshore? Choosing where your US software project gets built
Nearshore vs offshore software development for US companies: time overlap, talent depth, cost drivers and contracts compared, so you pick the right model.
Read more